When your HP laptop won’t switch on after an update, shutdown, reset, etc., it’s natural to panic. The frustration of an unresponsive power button is real. However, some care and attention might be able to resolve the issue.
After doing an update, shutting down, resetting, etc., on your HP laptop, you may find that Your HP Laptop Not Starting After BIOS Update? it no longer powers on. Issues with the power supply, software incompatibilities, or improper configuration are common sources of such problems.
Hardware malfunctions are quite unusual. In this article, we’ll walk you through some possible scenarios that can help you diagnose the problem with your HP laptop.
After installing Windows Update, HP Laptop Won’t Power On
After installing the newest version of Windows, several users report that their HP computer or tablet will no longer power on. A hard reset might be all that’s needed, or maybe there’s a more serious hardware problem that needs to be fixed.
It may be necessary to reset your HP laptop if it would not power on after installing Windows 10. To reset it, you must first unplug it from all sources of power. Remove the power supply and any USB hubs or peripherals you may have plugged into the system. Learn where the battery goes, and take it out.
Next, press and hold your power button for at least 15 seconds to discharge any residual electricity. Put the battery back in and plug it back in after waiting a few seconds. Test the computer’s power and performance.
Removing the BIOS Battery
Taking out the BIOS battery is a more involved option to try if the hard reset fails to solve the problem. You’ll need to disassemble your laptop in order to get to the BIOS battery, as it is soldered directly to the motherboard.
To get reach the BIOS battery, you’ll probably need a T5 Torx screwdriver. Turning the laptop over to its back allows you to get to the screws needed to remove the case. The motherboard’s BIOS battery is often located on the left side.
The battery can be swapped out or removed for a short time before being reinserted. Many users have reported success with this method in getting their computers back up and running.
A Bios Update Prevented My HP Laptop From Starting
After installing a BIOS update, if your HP laptop still won’t power on, try turning off the battery and the AC adapter. Following the instructions above, remove the BIOS battery. Keep the power button depressed for ten to fifteen seconds to completely discharge the battery. The next step is to reinstall the BIOS battery and reassemble the case.
If you press and hold the Windows key, the V key, and the power button for around five seconds, you can turn off your computer. After pressing the button, your laptop should take you to the standard login screen.
HP Laptop Not Turning On After Shutdown
There could be a number of reasons why a laptop shuts down and won’t restart. Malware and viruses can cause systems to overheat. Power outages are another common problem. In order to identify the root of the problem, you will need to test a few different solutions.
Try removing the batteries and any peripherals you may have plugged into your HP laptop before shutting it down. If you switch the laptop back on too soon, it could cause damage. If it gets too hot, it can cool down in this way.
Antivirus software can be used to check for infection in the event that your laptop reboots and becomes usable again. It’s possible that you picked up a virus on your travels and will need to have your system wipe off any infected data. In the event that it won’t power on, you may want to contact HP for assistance or take it in for service. If your product is still covered by the manufacturer’s warranty, you can get it fixed for free.
Having Trouble Resuming from Sleep/Hibernate on an HP Laptop
If you want to save power and prevent having to restart your laptop when you return to it, you can put it into sleep mode. When a laptop is inactive for a predetermined amount of time, it enters a sleep state. After a laptop has gone to sleep, it is possible that it will be unresponsive when you try to use it.
If your HP laptop isn’t waking up from sleep or hibernate, check to see that it’s plugged into a working power outlet. The possibility exists that its energy was depleted as it slept. If it doesn’t work, try removing the battery and performing a hard reset.
Pressing the Windows key plus R will restore the power plan to its factory defaults. Doing so will start the control panel working. When prompted, select “View By” and press “Enter.” Make the icons bigger and head to “Power Options” and “Change Plan Settings.” When you select “Restore Default Settings For This Plan,” the default options for that plan will be activated. As an alternate, you can go with “High Performance.”
